Army Bag w/3 x 2in

Modifx MiniaturesTransport Bag

$99.99
RRP $120.00 SAVE $20.01 (17%)

Out of Stock


Usually ships in 24 hours
SKU: MFX-BAG-2
Brand: Modifx

!WARNING! Due to size and weight restrictions this product cannot be shipped via Express Post.

This Modifx Army Figure Case includes one (1) Heavy Duty Bag, one (1) Carry Strap, one (1) Foam Topper Tray and three (3) 2in thick pluck foam trays. 

THE BAG - Covered with high-quality, sturdy black canvas, each bag is constructed from heavy-duty coreflute card, giving it a rigid, solid structure. Each bag features a variety of Velcro-sealed pockets, perfect for books, tokens and other accessories. The bag seals tight with zips and the the strap is attached with metal hooks. The bag is tough enough to withstand the knocks and bumps that inevitably happen during army transport. Strong enough to hold a 90kg man standing on top of it. You can rest assured that, short of the bag being run over by a lorry, your army will arrive at its destination 
safe and secure.

THE FOAM OPTIONS - All our bags come with foam, customisable to your needs. All foam trays have a foam bottom, providing additional structure and protection for your miniatures - and are available in the following sizes:

One inch tray - 35mm (1.5 inch) high, 350mm (14 inches) wide and 265mm (10.5 inches) deep. It contains 36 pre-cut slots 25mm (1 inch) x 50mm (2 inch) in size. Comparable to GW Infantry trays, the foam is perfect for GW and other standard 28mm miniatures, such as Space Marines in Power Armour, Ork Boyz, Guardsmen.Click here for more information about the one inch tray. see pic here

One and half inch tray - 54mm (2 inches) high, 350mm (14 inches) wide and 265mm (10.5 inches) deep. The tray features 15mm x 15mm pluckable foam. Once plucked, the slot is 43mm (1 and 3/4 inches) high. This tray is ideal for carrying miniatures which may need a little more space than the 1 inch pre-cut foam trays, such as Space Marine Terminators, Ork Nobz. Click here for more information about the one and a half inch tray. see pic here

Two inch tray - 70mm (2 and 3/4 inches) high, 350mm (14 inches) wide and 265mm (10.5 inches) deep. The tray features 15 x 15mm pluckable foam. Once plucked, the slot is 60mm (2 inches deep). This tray is perfect for holding small tanks or smaller Warjacks, such as Space Marine Rhinos, Cygnar Fireflies, Infinity Remotes and Bikes. Click here for more information about the two inch tray. see pic here

Three inch tray - 105mm (4 inches) high, 350mm (14 inches) wide and 265mm (10.5 inches) deep. The tray features 15x15mm pluckable foam. Once plucked, the slot is 95mm (3 and a 1/2 inches deep). This tray is idea for carrying larger tanks or larger Warjacks,such as Space Marine Crusaders, Cygnar Heavy Warjacks, Infinity Tags. Click here for more information about the three inch tray. see pic here 

THE PRICE! - Every bag has a hard-wearing exterior, heavy-duty construction, customisable, top-quality foam at an unbeatable price. Compare the price with the GW, Battlefoam and Sabol bags, which don't always include the foam, and you'll reach the same conclusion - with those bags, you're paying for a name and a logo. With Modifx, you're paying for what you need: quality.

TIPS and TRICKS -

In the unlikely event that a foam bottom separates from the tray, use ordinary PVA glue to stick it back together. Use a decent amount and leave overnight. Separation may occur by accidentally plucking the wrong section, carrying too many heavy items in the tray or just intense, prolonged use.

When you first receive your bag, you'll notice there is an upper foam topper laying on top. This thin foam will protect models held in the top tray from rubbing against the inside of the bag. Using scissors, round off the corners of the upper foam topper with scissors. This will make it easier to open and close the bag and less likely for the foam topper to catch in the zip.

Modifx bag with 2" pluck

By: on 11 July 2015
I use this bad with 3 2" pluck. The bag is well made and handles rough use well. The bag opens from a zip on the side that runs underneath, so the bag needs to be tipped on it's side to open. This means you must have the full volume of the bag filled with foam or else your minis will spill out. 2" is perfect for large based Warmachine Warjacks or Hordes Warbeasts. I have Trollblood Diretrolls and Scyrah Myrmidons in mine and they fit standing upright with some room above. I wouldn't recommend pluck for metal Privateer Press models as it pulls free of the foam tray's base.
(3)

Write a product review

Calculate Shipping



Pick up from The Combat Company - $0.00
Use this to organise a pick from our warehouse.


Others Also Bought

1 inch Pre-Cut

1 inch Pre-Cut

Modifx Foam Trays

$8.39 5+ in stock

30% OFF RRP $12.00
2 inch Pluck

2 inch Pluck

Modifx Foam Trays

$17.49 5+ in stock

13% OFF RRP $20.00
1.5 inch Pluck

1.5 inch Pluck

Modifx Foam Trays

$11.89 5+ in stock

52% OFF RRP $25.00

More From This Category

Army Bag w/1 x 1in & 1 x 2in & 1 x 3in

Army Bag w/1 x 1in & 1 x 2in & 1 x 3in

Modifx MiniaturesTransport Bag

$99.99 Out of Stock

Notify Me
17% OFF RRP $120.00
Army Bag w/1 x 1in & 2 x 1.5in & 1 x 2in

Army Bag w/1 x 1in & 2 x 1.5in & 1 x 2in

Modifx MiniaturesTransport Bag

$99.99 Out of Stock

Notify Me
17% OFF RRP $120.00
Army Bag w/2 x 1.5in & 1 x 3in

Army Bag w/2 x 1.5in & 1 x 3in

Modifx MiniaturesTransport Bag

$99.99 Out of Stock

Notify Me
17% OFF RRP $120.00